E-mail


French version

PLASTIK RECOVERY MACHINE
RECUPLASTIK II, RECUPLASTIK III

Catalogue

Home

New

Products

Meeting

Contact

Description of the machine:
The machine consists of a tubular chassis assembled by mechanical welding and having a three-point type tow system. To the front of this chassis (tractor side) two teeth are mounted enabling the unearthing of the plastic. These teeth are adjustable both in width and height.

It is possible to mount a blade on the end of the two teeth, enabling lifting of the plastic without tearing it (the blade is provided as an option). Two gauge wheels mounted on screw jacks enable the working depth to be adjusted at any moment and are also adjustable in width. Then there is the sheet cleaning and tension element, which consists of a bi-conical cage roller and two wheels mounted on a shaft driven by a hydraulic engine. The position of the wheels on the shaft as well as the position of the shaft in relation to the cage roller are adjustable. At the end of the chassis is the large diameter retractable mandrel. The mechanisation to pick up the sheets relieves work and reduces costs. This also gives the possibility of storing the plastic in the form of bales, thus facilitating handling and transport.

Sheet lifting autonomy is considerable (around 1000metres of plastic), and releasing of the bale is effortless and quick. Rolling up the plastic is always proportional to the movement of the machine. The bale formed is regular and compact. Adjustments are easy and fast.

Elements of safety and conformity:
The machine has few units and from the tractor cabin the course of the sheeting may be easily monitored. The bale of plastic once released stays on the ground thus avoiding handling accidents. The operator may at any moment stop dead the rotation of the hydraulic engine from his driving position on the machine. This is possible from an emergency stop button.


Recuplastik (R) III

The Récup III has the same features as the Récup II with the difference that the mandrel is replaced by a drum enabling the lifting up of mini-tunnel plastic without damaging the crops.

Technical characteristics
Dimension
Recup II/A
Recup II/B
Recup III
Width
2,20 m
2,40 m
2,1 m
Clearence
0,40 to 0,70 m
0,40 m to 0,70 m
0,40 m to 0,70 m
Min. operating power
40 cv
50 cv
60 cv
Min. sheet width
30 to 35 Microns
30 to 35 Microns
60 Microns
Width of recoverable film
On tunnel
Mini
1,20 m
1,20 m
1,50 m
Maxi
1,70 m
2,00 m
1,80 m
Capacity
1000 m and more
1000 m and more
2000 m and more

All technical data is given informally as a guide and may be changed without notice.